The manual emergency pump allows the operation of the main hydraulic circuit and the outriggers circuit. Safety feature required by ANSI A92.2
It allows the platform to be lowered and placed in the transport position in the event of any contingency that may occur in the main drive.

The Emergency Stop Valve is designed to derive the hydraulic operation pressure of the aerial to the return circuit.
The Emergency Stop allows to stop the Aerial Lift easily and immediately either from the base or from the platform.

Plastic reinforced with fiberglass platform, equipped with ergonomic steps and integrated controls, linked to the side of the upper arm by the leveling axis.
The platform stands out for its resistance due to its composition and morphology. It also has improved accessibility thanks to its ergonomic steps and the great advantage of having three sides of the basket free for better operator maneuverability.

Safety slide that prevents the involuntary activation of the upper controls – Multi-Handle Controls – If Joysticks is chosen, the Safety Lock is a trigger that opens the main valve when pressed.
The goal of this device is to prevent accidental maneuvers providing confidence and safety to the operator.

Selector valve integrated into the column, which allows to redirect the hydraulic operation pressure to the lower or upper controls.
It allows to prioritize the lower controls in case of an emergency that disables the operator at the platform (Override), so that another operator can descend the bucket to the base and assist the operator who is inside the platform.

Mechanical assembly consisting of chains and gears that built a lower circuit and an upper circuit linked to the platform and to the column.
The Automatic Platform Levelling System guarantees continuous leveling without the need for adjustments or corrections, allowing the operator to always maintain a safe position.

Rotation is achieved by a Gear Box + Slewing Drive. The actuation of the column rotation works by set of reductions gears and an endless-crown system and pinion-crown in an oil bath.
This system provides a smoother and more precise column rotation, minimizing the wear and oscillation of the platform.

Instruments for measuring the hydraulic oil level and temperature of the whole circuit, integrated into the hydraulic tank.
They allow to visualize the level and the temperature of oil assuring in real time the normal operation of the equipment.

Quick couplings installed in the hydraulic circuit to easily connect a manometer and measure the hydraulic system.
These couplings allow to control the pressure level of the hydraulic system.

System that consists of bolts and bushings that release lubricant against friction.
It improves the lifespan of the equipment and minimizes the need for maintenance.

The hydraulic system is fully embedded inside booms with non-conductive SAE 100 R7 thermoplastic hoses a specific inhibitor to avoid environmental aggression (humidity, moisture, ozone, UV). Security element required by ANSI A92.2
Prevents premature wear and exposure of the component on a daily work basis.

Often named piloted anti-return valves, it consists of a device that allows the safe operation of the hydraulic cylinders. These valves are integrated in the rear lid of the cylinders.
They keep the aerial lift in position before any contingency in the hydraulic system such as a hose damage. They also allow maximum use of the space in the articulation of the cylinders.

The Electrical Insulation consists of the integration of specific internal and external components in the upper arm intended to provide the electrical insulation according to the ANSI A92.2 Standard, Cat. C 46 kV. The central section of the upper arm is a tube manufactured by filament winding process, which are continuous fibers impregnated with epoxy resins. The manufacturing process incorporates the stage of curing the resins in the oven to ensure the total elimination of air and moisture. The components of the insulation are tested before being integrated into the arms. The arms are tested according to ANSI A92.2 during the assembly process at 100 kV.
All Axion insulated Aerial Lifts are tested and certified to work in contact with live-lines. The insulation of the upper arm of the Aerial Lifts avoids the electrical conduction to the operator in the platform. Axion Aerial Lifts Insulated Cat. C allow working in 46 kV lines direct contact.

The chassis insulation consists of the integration of specific internal and external components in the lower arm intended to provide the electrical insulation of the chassis according to the ANSI A92.2 Standard (50 kV). The central section of the lower arm is a tube manufactured by filament winding process, which are continuous fibers impregnated with epoxy resins. The manufacturing process incorporates the stage of curing the resins in the oven to ensure the total elimination of air and moisture. The components of the insulation are tested before being integrated into the arms. The arms are tested according to ANSI A92.2 during the assembly process for 3 minutes at 50 kV.
All Axion insulated Aerial Lifts are tested and certified to work in contact with live-lines. The insulation of the lower arm of the Aerial Lifts guarantees to the crew the non-conduction of energy to the service body and /or the truck´s chassis.

Hydraulic couplings and directional valves integrated into the main circuit of the equipment.
It allows to connect all kinds of hydraulic tools at the platform to use them in height during the operations that require it.

Electronic system integrated in the platform, which links by Radio-Frequency the engine to the vehicle and allows to control the start, stop and speed-throttle of the engine itself.
This system helps the operation of the Aerial Lift with only one operator. It also allows to reduce fuel consumption, sound emission and gases.

Plastic bucket for the interior of the platform. Designed, manufactured and tested according to IEC 61057 Standards. The test is carried out with a voltage of 50 kV.
The liner provides electrical insulation and protection of the lower part of the operator when work on direct contact.

Set consisting of two plastic components manufactured by rotational molding.
The liner protectors offer additional guard to the lips and bottom of the bucket, preventing superficial damages. Extends the lifespan of the liner.

Platform Tilt consists of a hydraulic cylinder that allows the platform to rotate 90 ° from a vertical to horizontal position and vice versa.
It facilitates the immediate evacuation of the operator in case of any contingency. This feature also allows the cleaning of the platform extending its useful life.

Multi-function device that allows to control the lower arm, upper arm and rotation. The joystick has a built-in security function against involuntary movements.
Thanks to the Joystick, we can operate the aerial lift with one hand and have the other hand free to perform any kind of activities improving productivity.

Hydraulic “A” Type Outriggers with anti-return pilot valve.
Key element to achieve the stability needed, providing a safety operation of the T 4313 according ANSI SIA A92.2 Standards.

The horometer is a service time counter integrated with the hydraulic pump drive.
It allows carrying out maintenance in a timely manner.

Instrument that measures the inclination of the vehicle and the Aerial Lift.
Safety feature that ease the correct stabilization of the aerial lift prior to operate it, in order to be within the safety limits indicated by ANSI A92.2 Standard

Electronic safety system that enables the use of the Aerial Lift only when outriggers are correctly positioned.
This system guarantees that the Aerial Lift is not used if the conditions of stability are not properly secured. Also, it is impossible to retract the outriggers if the equipment is not stowed.

Honda Engine 163 cm3 5.5 Hp with manual starter and Casappa Hydraulic Pump 2,5 cm3/rev.
It allows to power the T 4313 without a PTO.

Honda Engine 163 cm3 5.5 Hp with manual starter and Casappa Hydraulic Pump 2,5 cm3/rev.
It allows to power the T 4313 without a PTO, having the convenience of the electric starter.

Adjustable and removable outer protector of the insulating inserts (lower and upper) and platform.
Protects the inserts of the arms and platform from superficial mechanical damage and hard weather conditions. In addition, it prevents the entry of water and dirt into the platform.

Structural set for mechanical mounting of the Aerial Lift and the vehicle.
Installation systems kit that are an essential part of the Aerial Lift and that are included in all AXION products. Reduces assembly and mounting times.